Single stage gas burner
proportional gas burner
Single stage gas burner
proportional gas burner
Single stage gas burner
Single stage gas burner
Smooth Two Stage Fire Gas Burner
Smooth Two Stage Fire Gas Burner
Smooth Two Stage Fire Gas Burner
proportional gas burner
proportional gas burner
Single stage oil burner
Two stage fuel burner
Three stage fuel burner
Two-stage oil and gas dual-purpose burner
Proportional adjustment oil and gas dual-purpose burner
Proportional adjustment oil and gas dual-purpose burner
Industrial split oil, gas and dual fuel burners
Ultra-low NOx integrated and split burners
DS 68-200/E FGR burner
Single stage gas burner
DS series single-stage burners are low NOx emission products, developed for some users with special needs, and meet the requirements of most pollution emission standards. This series of burners is available in 5 different models, with outputs ranging from 16-330 kW, in four different configurations. High quality manufacturing standards guarantee safe operation of the burner. The burner is equipped with a microprocessor based flame control panel with fault diagnostics.
Single stage gas burner
The output range of TS/1 series burners is 70-550 kW, suitable for medium and low temperature hot water boilers, hot air or steam boilers, and heat transfer oil boilers. The burner is 'single stage' with a microprocessor panel that provides operational indication and fault cause diagnosis. The specially designed air inlet circuit ensures optimum noise emissions. Improved fan and combustion head performance guarantees flexibility of use and individual Good operation at plant output.
proportional gas burner
The DS 310-410-800/M BLU burner is characterized by a monolithic structure, which means that all necessary components are combined in one unit, making installation easier and faster. Burners range from 500 to 8100 kW, and they are designed for use in hot water boilers or industrial steam generators. Operation can be "two-stage progressive", or optionally "modulated" with a PID logic regulator installed or via an external 4-20mA/0-10V signal. The regulated mechanical cam mechanism allows the capture to increase high over all firing rate ranges modulation ratio. As a result, the burner can precisely supply the required power, ensuring efficient system level and stability settings, gaining fuel consumption and reducing operating costs. The combustion head, through advanced simulation design equipment, guarantees to reduce pollution emissions (NOx < 80 mg/kWh).
Single stage gas burner
DS series single-stage burners are low N0x emission products, developed for some users with special needs, and meet the requirements of most pollution emission standards.
This series of burners has 5 different models, the output range is 16-330 kW, and four different structures. High quality manufacturing standards guarantee safe operation of the burner.
The burner is equipped with a microprocessor based flame control panel with fault diagnostics.
Single stage gas burner
The output range of Dawson DS/1 series burners is 45-550 dry watts, suitable for medium and low temperature hot water boilers, hot air or steam boilers, and heat transfer oil furnaces. The burner is "single-stage" with a microprocessor panel that provides operation indication and fault cause diagnosis. The specially designed air inlet circuit ensures optimum noise emission. Improvements in fan and burner performance ensure flexibility of use and good operation at various outputs.
Smooth Two Stage Fire Gas Burner
The output range of TS series burners is 45-2715 kW, which is suitable for medium and low temperature hot water boilers, hot air and steam boilers and heat transfer oil furnaces. The operating mode of this series of burners is "smooth two-stage fire". TS series burners can achieve high-efficiency operation levels in various application areas, reducing fuel consumption and operating costs. The unique design ensures that the equipment is small in size, easy to use and easy to maintain. All kinds of accessories are complete to ensure the flexibility of work.
Smooth Two Stage Fire Gas Burner
The output range of TS /M series burners is 45- 2715 kW, suitable for medium and low temperature hot water boilers, hot air and steam boilers and heat transfer oil furnaces. The operation mode of this series of burners is "smooth two-stage fire". TS series burners can achieve high-efficiency operation levels in various application fields, reducing fuel consumption and operating costs, and the unique design ensures that the equipment is small in size and easy to use. , easy to maintain. All kinds of accessories are complete to ensure the flexibility of work.
Smooth Two Stage Fire Gas Burner
DS/2 BLU series burners have an output range of 44 - 2400 kW and are suitable for medium and low temperature hot water boilers, hot water or steam boilers, and heat transfer oil furnaces. The burner is in the "smooth two-stage fire" operation mode, and a PID ratio regulator and corresponding probe can also be installed to realize the "proportional adjustment" operation mode. The DS/2 BLU series burners ensure efficient system operation in a variety of applications, reducing fuel consumption and operating costs. The unique design of the burner reduces the size of the equipment, making it easy to use and maintain. Specially designed air duct loops and the use of sound-absorbing materials greatly reduce noise emissions. A wide range of optional accessories enhances the flexibility of equipment operation.
proportional gas burner
The DS 310-410-800-900/E BLU burner is characterized by a monolithic structure, which means that all necessary components are combined in one unit, making installation easier and faster. Burners range from 500 to 9500 kW, and they are designed for use in hot water boilers or industrial steam generators. Operation can be "two-stage progressive" or optionally "modulated" with a PID logic regulator installed or via an external 4-20mA/0-10V signal. The adjustment uses electronic ratio adjustment. As a result, the burner can supply the required power precisely, ensuring efficient system level and stability settings, resulting in improved fuel consumption and reduced operating costs. The combustion head, through advanced simulation design equipment, guarantees to reduce pollution emissions (NOx < 80 mg/kWh).
proportional gas burner
The GAS powder metallurgy range covers an ignition range of 870 to 4885 kW. Operation features progressive two-stage operation or full modulation with an advanced modulation control system and probe. The gas-fired powder metallurgy range of burners includes applications that are ideal for applications requiring multi-function control (process, steam, refrigeration absorption) where one variable requires output. Due to their sheet metal construction, they are particularly suitable for machining applications where plastic materials may be easily damaged or deformed. Simplified maintenance is achieved by sliding rods that allow access to the burner of the burner head boiler without disassembly.
Single stage oil burner
TG series light oil burners are specially developed for some household users with special requirements.
There are 5 models in the series, with outputs ranging from 35 - 305 KW, in five different configurations.
All types of burners are easy to install and adjust, and their smaller volumes are suitable for various boilers currently on the market.
All TG series burners are rigorously tested before leaving the factory.
Two stage fuel burner
The output range of TL series burners is 154 to 2700 kW, suitable for various low and medium temperature hot water boilers, hot air and steam generators, and heat transfer oil furnaces. All models are suitable for burning light oil and biodiesel blends with a light oil and biodiesel content of not more than 5%. The adjustment method is "two-stage fire"; the burner is equipped with a microelectronic control box, which can provide the operating status and fault feedback information of the burner. The specially designed air supply system ensures that the operating noise of the burner is kept to a minimum. Improvements in fan performance and combustion head guarantee flexibility of use and optimum operation in the work area. Some advanced designs of the burner make the burner smaller and more convenient to use and maintain. Additional options ensure that the burner's functionality can be upgraded at any time.
Three stage fuel burner
The output range of DG series burners is 712- 5340kw.
There are two types of burners in this series, which can be well matched with boilers with pressure hearth. Due to the characteristics of this series of burners, they can be used in many practical cycles and regular heat loads, such as business and industrial fields. A three-stage adjustable hydraulic cylinder system is used to adjust the opening of the windshield, according to the required output, and the air volume of Taojie; through fine-tuning, each working point can be guaranteed the most stable combustion.
Two-stage oil and gas dual-purpose burner
The output range of TLS 28-38 series burners is 100-580 kW. This series of burners is designed to be used in hot or superheated water boilers, hot air generators or steam boilers, and heat transfer oil furnaces.
The adjustment method of this series of burners is "two-stage fire"; the burner is equipped with an electronic device - a status display screen, which can conduct a comprehensive diagnosis of the burner, including: operating hours, ignition times and fault information diagnosis.
Fans with forward-leaning blades and sound-absorbing materials installed at the fan inlets. Guaranteed minimum noise emissions. The improved performance of the fan and combustion head ensures that the burner operates well within its full output range.
Proportional adjustment oil and gas dual-purpose burner
The output range of TLS 70-250/M series burners is 232-2460 kW. This series of burners is designed to be used in hot or superheated water boilers, hot air generators or steam boilers, and heat transfer oil furnaces.
The adjustment method of this series of burners is "proportional adjustment"; it can carry out comprehensive diagnosis of the burner, including: operating hours, ignition times and fault information diagnosis. Fans with forward-leaning blades and sound-absorbing materials installed at the fan inlets. Guaranteed minimum noise emissions. Improved fan and burner performance. Make sure that the burner operates well in its full output range.
The unique design ensures the reduction of the overall size, which is convenient for use and maintenance. Various accessories are available to further enhance the performance of the burner.
Proportional adjustment oil and gas dual-purpose burner
The output range of GI/EEM1400-4500 series burners is 407-4650 dry watts. This series is specially designed for users with large output requirements and can match various types of boilers with ordinary or pressurized furnaces.
This series of burners is in the "smooth two-stage fire" operation mode. If a PID proportional meter and probe are installed, it can also be changed to "proportional adjustment" mode. This series of burners can use two operating modes of gas or oil. , Change the required operating fuel through the changeover switch. The light oil circuit has its own motor: Therefore, the oil pump stops running when the gas is used to prevent the oil pump from being blocked and prevent the fuel from entering the gas circulation pipeline.
A range of optional accessories and gas manifolds ensure maximum flexibility in burner operation.
Industrial split oil, gas and dual fuel burners
The TB series is a split burner, suitable for large-scale applications (such as district heating, hospitals, etc.), and also matches hot water boilers, steam furnaces and heat transfer oil furnaces. Used in food, chemical, textile and other industries.
TB series can provide electronic or mechanical proportional burners according to customer needs.
The TB 9-12-16-20 is equipped with a pistol. Combustion support in the standard configuration of the TB series. The air temperature can be preheated to 250°C. The new adjustable geometry burner head enables NOx emissions of less than 80mg when burning natural gas. TB3-TB20 models are all hinged to facilitate maintenance of the combustion head. As part of the offer, there are different accessories available (fans, control panels, high pressure gas manifolds, etc.).
Ultra-low NOx integrated and split burners
In recent years, due to the dramatic increase in pollution, there has been a growing focus on performance, energy efficiency and emission reduction around the world, especially in all highly industrialized countries. To meet the ever-increasing demand for extremely low NOx emissions, Dawson-based thousand FGR (flue gas recirculation) low-emission technology has developed a new generation of integral (350-20000kw) burners that can reach the most stringent limits.
DS 68-200/E FGR burner
DS 68-200/E FGR burner comprising a monolithic structure characterized by;
This means that all necessary components are combined in one unit, making installation easier and faster. Burners range from 500 to 2300 dry watts, and they are designed for use in hot water boilers or industrial steam generators.
始创于1984年
致力于滚丝机床的生产与研发
Company Profile
河北邢工机械制造有限公司位于机械制造业历史悠久的河北省任县邢家湾镇。公司是中国机械零部件协会会员单位，成立于1984年，在三十余年的发展历程中，培养了一批素质高、技术硬的管理人员和职工队伍。目前滚丝机床是公司的优势产品，产品涵盖四大系列，20多个品种，销往全国各地。
查看详情
30
余年
生产研发经验
20
多个
机床产品种类
1200
多台
机床产品年产量
300
余家
合作伙伴
聚焦邢工动态
公司新闻
始终坚持以质量求发展，以质量求生存的原则，持续提升邢工品牌实力
技术资料
每个生产步骤都严格把控并不断测试
Follow Us
Quanzhou tenghao automation equipment Co., Ltd
Tel: +86 595 22781716 +86 400-0808-139
E-mail: th@dowsonburners.com
WhatsApp：+86 18259706016
WeChat：+86 18259706016
Website: www.dowsonburners.com
Address: Plant 2, boutique Park, Huinan Industrial Zone, Taiwan investment zone, Quanzhou, Fujian, China
copyright © 2022 Quanzhou tenghao automation equipment Co., Ltd
-
Hotline
-
Tel:
-
Follow us
Scan QR code.
- TOP