Single stage oil burner
TG/1 series
TG series light oil burners are specially developed for some household users with special requirements.
There are 5 models in the series, with outputs ranging from 35 - 305 KW, in five different configurations.
All types of burners are easy to install and adjust, and their smaller volumes are suitable for various boilers currently on the market.
All TG series burners are rigorously tested before leaving the factory.
Hotline：
Category：
Keywords：
Single stage oil burner
Related products
DS series single-stage burners are low NOx emission products, developed for some users with special needs, and meet the requirements of most pollution emission standards. This series of burners is available in 5 different models, with outputs ranging from 16-330 kW, in four different configurations. High quality manufacturing standards guarantee safe operation of the burner. The burner is equipped with a microprocessor based flame control panel with fault diagnostics.
Dawson DS2-5/M series smooth two-stage fire and proportional adjustment gas burners are low NOx emission products. This series of burners is specially developed to meet various home heating needs, while meeting the most stringent pollution emission standards.
The output range of TS/1 series burners is 70-550 kW, suitable for medium and low temperature hot water boilers, hot air or steam boilers, and heat transfer oil boilers. The burner is 'single stage' with a microprocessor panel that provides operational indication and fault cause diagnosis. The specially designed air inlet circuit ensures optimum noise emissions. Improved fan and combustion head performance guarantees flexibility of use and individual Good operation at plant output.
The DS 310-410-800/M BLU burner is characterized by a monolithic structure, which means that all necessary components are combined in one unit, making installation easier and faster. Burners range from 500 to 8100 kW, and they are designed for use in hot water boilers or industrial steam generators. Operation can be "two-stage progressive", or optionally "modulated" with a PID logic regulator installed or via an external 4-20mA/0-10V signal. The regulated mechanical cam mechanism allows the capture to increase high over all firing rate ranges modulation ratio. As a result, the burner can precisely supply the required power, ensuring efficient system level and stability settings, gaining fuel consumption and reducing operating costs. The combustion head, through advanced simulation design equipment, guarantees to reduce pollution emissions (NOx < 80 mg/kWh).
DS series single-stage burners are low N0x emission products, developed for some users with special needs, and meet the requirements of most pollution emission standards.
This series of burners has 5 different models, the output range is 16-330 kW, and four different structures. High quality manufacturing standards guarantee safe operation of the burner.
The burner is equipped with a microprocessor based flame control panel with fault diagnostics.
The output range of Dawson DS/1 series burners is 45-550 dry watts, suitable for medium and low temperature hot water boilers, hot air or steam boilers, and heat transfer oil furnaces. The burner is "single-stage" with a microprocessor panel that provides operation indication and fault cause diagnosis. The specially designed air inlet circuit ensures optimum noise emission. Improvements in fan and burner performance ensure flexibility of use and good operation at various outputs.
Smooth Two Stage Fire Gas Burner
The output range of TS series burners is 45-2715 kW, which is suitable for medium and low temperature hot water boilers, hot air and steam boilers and heat transfer oil furnaces. The operating mode of this series of burners is "smooth two-stage fire". TS series burners can achieve high-efficiency operation levels in various application areas, reducing fuel consumption and operating costs. The unique design ensures that the equipment is small in size, easy to use and easy to maintain. All kinds of accessories are complete to ensure the flexibility of work.
Smooth Two Stage Fire Gas Burner
The output range of TS /M series burners is 45- 2715 kW, suitable for medium and low temperature hot water boilers, hot air and steam boilers and heat transfer oil furnaces. The operation mode of this series of burners is "smooth two-stage fire". TS series burners can achieve high-efficiency operation levels in various application fields, reducing fuel consumption and operating costs, and the unique design ensures that the equipment is small in size and easy to use. , easy to maintain. All kinds of accessories are complete to ensure the flexibility of work.
Smooth Two Stage Fire Gas Burner
DS/2 BLU series burners have an output range of 44 - 2400 kW and are suitable for medium and low temperature hot water boilers, hot water or steam boilers, and heat transfer oil furnaces. The burner is in the "smooth two-stage fire" operation mode, and a PID ratio regulator and corresponding probe can also be installed to realize the "proportional adjustment" operation mode. The DS/2 BLU series burners ensure efficient system operation in a variety of applications, reducing fuel consumption and operating costs. The unique design of the burner reduces the size of the equipment, making it easy to use and maintain. Specially designed air duct loops and the use of sound-absorbing materials greatly reduce noise emissions. A wide range of optional accessories enhances the flexibility of equipment operation.
FEEDBACK
Follow Us
Quanzhou tenghao automation equipment Co., Ltd
Tel: +86 595 22781716 +86 400-0808-139
E-mail: th@dowsonburners.com
WhatsApp：+86 18259706016
WeChat：+86 18259706016
Website: www.dowsonburners.com
Address: Plant 2, boutique Park, Huinan Industrial Zone, Taiwan investment zone, Quanzhou, Fujian, China
copyright © 2022 Quanzhou tenghao automation equipment Co., Ltd
-
Hotline
-
Tel:
-
Follow us
Scan QR code.
- TOP